Home > Cleaning
The Electrolytic metal cleaning system is a must for any restorer. It will easily remove rust, paint and grease from any metal parts, without the need to resort to wire brush, sand blaster or highly corrosive chemicals and it’s easy on the parts. It’s so easy you have to see it to believe it, so we’ve set up a series of photos below to show the steps involved and the results. Setting up is easy with the comprehensive instruction guide.
A blend of cleaners that has a variety of metal finishing uses. It is usually used as a cleaner to remove light oils and grease, oxides and smuts. It is also used as part of the pre-plating cleaning process and as such, is used before the acid pickle.
Chrome stripper can be used on steel, iron,copper, brass, zinc and white metals. It should not be used on aluminium, or aluminium alloys. The system enables stripping of chrome without the use of powerful acids.
The Chrome stripper is very cost effective andstrips chrome within a few minutes.
Nickel stripper can be used on steel, iron, copper, brass, zinc and white metals. The system enables stripping of Nickel without the use of powerful acids.
The Nickel stripper is very cost effective and strips Nickel within 30 - 60 minutes.
Acid Pickle easily dissolve in water to produce a balanced acidic solution used in a wide variety of metal finishing operations
A pre-process that allows Aluminium to be safely plated with Zinc oxide. This in turn is removed and replaced with Nickel when the piece is plated in the Nickel tank. This can then be plated with any of our Nickel, Replica Chrome or Copper plating kits.copper, brass, zinc and white metals. it should not be used on aluminium, or aluminium alloys.